Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;
to get in touch the Atlantik V2.X to your property Wi Fi router you have to proceed with the 11 actions.
1. Turn fully off all units.
2. Switch on just the unit that is first will connect.
3. In your tablet pick the wifi-socket.
4. Start Chrome from your own tablet and kind 192.168.1.100 when you look at the target club.
5. Username admin password 000000
6. Change mode to Sat.
7. Place your community SSID and password. ( Encryption constantly Disable : ( the system think it is automaticly )
9. Go to system within the primary menu, and then click restart.
10. Head to wifi establishing once more and alter to your system router SSID.
11. get the Orphek app and do search id, it should discover the very first device.
Then do from 1 to 11 when it comes to units that are remaining.
7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).
Into the SSID package you will key in your system title. This might be instance sensitive and painful therefore make sure to utilize money or letters that are small its proper. Into the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )
Select /Keep ,disable within the encryption field (don’t confuse with encryption key package). Your tablet will immediately discover the encryption key in case the router supports it.
9. When you look at the left that is upper of UART display you can expect to a range of fundamental, Advanced, and System.
Select system TAB plus in the very first part of this web page you will observe a restart key. Press the restart switch. a screen look saying the web browser cannot connect with the internet protocol address. That is fine since you should have to connect with your router SSID.
10. In your tablet /Phone connect with your wi-fi Router network SSID.
11.Open the Orphek application and then click the clear switch regarding the top right associated with display screen. Now click on the search switch situated on the top left for the display. Your system should get the tablet as well as your IP that is new address your Orphek light should appear.
Perform actions 1 to 11 for the remaining Orphek devices.
* choice : you can easily set the internet protocol address fixed , for better connection
You shall then go to:
A. Unchecked The Enable DHCP
B. Enter a fixed ip that belongs to your house router. As an example:
Should your router is 100.168.20.1, you’ll be able to enter 100.168.20.2 or any internet protocol address between .2 and .254.
the IP address must be unique if not it shall result in an internet protocol address conflict
C. It’s also wise to go into the submask as well as in many cases it really is 255.255.255.0.
D. Go into the Gateway Address : it must be your Router internet protocol address
E. Then perform some same into the staying devices. BUT etch unit will need to have unique internet protocol address .
instance:
In case your House Router set:
ssid: house
password : 12345678
internet protocol address 192.168.100.1
submusk 255.255.255.0
then chances are you should set product 1
1.work type: Sta
2.SSID: house
3.Encryption Disable : ( the system believe it is automaticly )
4.Encryption key: 12345678
5.then click Save
6. Unchecked The Enable DHCP
7. set : internet protocol address: 192.168.100.10
8. set :submusk: 255.255.255.0
9. set Gateway Address 192.168.100.1
11. Head to system when you look at the menu that is main and then click restart.
12. get the Orphek application and do search id, it will discover the very first product.
then chances are you should set product 2 –
OBS: First turn OFF product 1 (so be no any internet protocol address conflict )
1.work type: Sta
2.SSID: house
3.Encryption Disable : ( the system think it is automaticly )
4.Encryption key: 12345678
5.then click Save
6. Unchecked The Enable DHCP
7. set : internet protocol address: 192.168.100. 11
8. set :submusk: 255.255.255.0
9. set Gateway Address 192.168.100.1
11. Head to system within the primary menu, and then click restart.
12. go the Orphek software and do search id, it will find device 2 .